161 lines
6 KiB
Markdown
161 lines
6 KiB
Markdown
# Swaysome
|
|
|
|
This binary helps you configure sway to work a bit more like Awesome. This
|
|
currently means workspaces that are name-spaced on a per-screen basis.
|
|
|
|
It may also work with i3, but this is untested.
|
|
|
|
*swaysome* should be compatible with [sworkstyle](https://lib.rs/crates/sworkstyle).
|
|
|
|
|
|
## Installation
|
|
|
|
|
|
Arch Linux: Found on the AUR as [swaysome-git](https://aur.archlinux.org/packages/swaysome-git).
|
|
|
|
If you have Rust installed, then you can just `cargo install swaysome` and you're good to go.
|
|
|
|
Otherwise, you may grab a [pre-built
|
|
binary](https://gitlab.com/hyask/swaysome/-/jobs/artifacts/master/raw/target/release/swaysome?job=build:cargo) from the
|
|
CI and put it in your `$PATH`.
|
|
|
|
**WARNING**: please double-check that your `swaysome` binary is in `sway`'s `$PATH`. Depending on your setup, the
|
|
`$PATH` you have in your shell may not be the same as `sway`'s, and if `swaysome` can't be called by `sway`, the
|
|
symptoms will only look like non-functional shortcuts.
|
|
If you're in this situation, a quick workaround is to call `swaysome` with its full absolute path from `sway`'s config
|
|
to check that everything works before fixing your `$PATH` issue.
|
|
|
|
|
|
## Usage
|
|
|
|
Then create the file (and the directory if needed) `~/.config/sway/config.d/swaysome.conf` and paste this inside:
|
|
```
|
|
# Change focus between workspaces
|
|
unbindcode $mod+10
|
|
unbindcode $mod+11
|
|
unbindcode $mod+12
|
|
unbindcode $mod+13
|
|
unbindcode $mod+14
|
|
unbindcode $mod+15
|
|
unbindcode $mod+16
|
|
unbindcode $mod+17
|
|
unbindcode $mod+18
|
|
unbindcode $mod+19
|
|
bindcode $mod+10 exec "swaysome focus 1"
|
|
bindcode $mod+11 exec "swaysome focus 2"
|
|
bindcode $mod+12 exec "swaysome focus 3"
|
|
bindcode $mod+13 exec "swaysome focus 4"
|
|
bindcode $mod+14 exec "swaysome focus 5"
|
|
bindcode $mod+15 exec "swaysome focus 6"
|
|
bindcode $mod+16 exec "swaysome focus 7"
|
|
bindcode $mod+17 exec "swaysome focus 8"
|
|
bindcode $mod+18 exec "swaysome focus 9"
|
|
bindcode $mod+19 exec "swaysome focus 0"
|
|
|
|
# Move containers between workspaces
|
|
unbindcode $mod+Shift+10
|
|
unbindcode $mod+Shift+11
|
|
unbindcode $mod+Shift+12
|
|
unbindcode $mod+Shift+13
|
|
unbindcode $mod+Shift+14
|
|
unbindcode $mod+Shift+15
|
|
unbindcode $mod+Shift+16
|
|
unbindcode $mod+Shift+17
|
|
unbindcode $mod+Shift+18
|
|
unbindcode $mod+Shift+19
|
|
bindcode $mod+Shift+10 exec "swaysome move 1"
|
|
bindcode $mod+Shift+11 exec "swaysome move 2"
|
|
bindcode $mod+Shift+12 exec "swaysome move 3"
|
|
bindcode $mod+Shift+13 exec "swaysome move 4"
|
|
bindcode $mod+Shift+14 exec "swaysome move 5"
|
|
bindcode $mod+Shift+15 exec "swaysome move 6"
|
|
bindcode $mod+Shift+16 exec "swaysome move 7"
|
|
bindcode $mod+Shift+17 exec "swaysome move 8"
|
|
bindcode $mod+Shift+18 exec "swaysome move 9"
|
|
bindcode $mod+Shift+19 exec "swaysome move 0"
|
|
|
|
# Focus workspace groups
|
|
unbindcode $mod+Ctrl+10
|
|
unbindcode $mod+Ctrl+11
|
|
unbindcode $mod+Ctrl+12
|
|
unbindcode $mod+Ctrl+13
|
|
unbindcode $mod+Ctrl+14
|
|
unbindcode $mod+Ctrl+15
|
|
unbindcode $mod+Ctrl+16
|
|
unbindcode $mod+Ctrl+17
|
|
unbindcode $mod+Ctrl+18
|
|
unbindcode $mod+Ctrl+19
|
|
bindcode $mod+Ctrl+10 exec "swaysome focus-group 1"
|
|
bindcode $mod+Ctrl+11 exec "swaysome focus-group 2"
|
|
bindcode $mod+Ctrl+12 exec "swaysome focus-group 3"
|
|
bindcode $mod+Ctrl+13 exec "swaysome focus-group 4"
|
|
bindcode $mod+Ctrl+14 exec "swaysome focus-group 5"
|
|
bindcode $mod+Ctrl+15 exec "swaysome focus-group 6"
|
|
bindcode $mod+Ctrl+16 exec "swaysome focus-group 7"
|
|
bindcode $mod+Ctrl+17 exec "swaysome focus-group 8"
|
|
bindcode $mod+Ctrl+18 exec "swaysome focus-group 9"
|
|
bindcode $mod+Ctrl+19 exec "swaysome focus-group 0"
|
|
|
|
# Move containers to other workspace groups
|
|
unbindcode $mod+Ctrl+Shift+10
|
|
unbindcode $mod+Ctrl+Shift+11
|
|
unbindcode $mod+Ctrl+Shift+12
|
|
unbindcode $mod+Ctrl+Shift+13
|
|
unbindcode $mod+Ctrl+Shift+14
|
|
unbindcode $mod+Ctrl+Shift+15
|
|
unbindcode $mod+Ctrl+Shift+16
|
|
unbindcode $mod+Ctrl+Shift+17
|
|
unbindcode $mod+Ctrl+Shift+18
|
|
unbindcode $mod+Ctrl+Shift+19
|
|
bindcode $mod+Ctrl+Shift+10 exec "swaysome move-to-group 1"
|
|
bindcode $mod+Ctrl+Shift+11 exec "swaysome move-to-group 2"
|
|
bindcode $mod+Ctrl+Shift+12 exec "swaysome move-to-group 3"
|
|
bindcode $mod+Ctrl+Shift+13 exec "swaysome move-to-group 4"
|
|
bindcode $mod+Ctrl+Shift+14 exec "swaysome move-to-group 5"
|
|
bindcode $mod+Ctrl+Shift+15 exec "swaysome move-to-group 6"
|
|
bindcode $mod+Ctrl+Shift+16 exec "swaysome move-to-group 7"
|
|
bindcode $mod+Ctrl+Shift+17 exec "swaysome move-to-group 8"
|
|
bindcode $mod+Ctrl+Shift+18 exec "swaysome move-to-group 9"
|
|
bindcode $mod+Ctrl+Shift+19 exec "swaysome move-to-group 0"
|
|
|
|
# Move focused container to next output
|
|
bindcode $mod+o exec "swaysome next-output"
|
|
|
|
# Move focused container to previous output
|
|
bindcode $mod+Shift+o exec "swaysome prev-output"
|
|
|
|
# Init workspaces for every screen
|
|
exec "swaysome init 1"
|
|
```
|
|
|
|
Finally append your `sway` configuration with this:
|
|
```
|
|
include ~/.config/sway/config.d/*.conf
|
|
```
|
|
|
|
You should end-up with workspaces from `1` to `0`, prefixed with a screen index,
|
|
giving you workspace `11` on the first screen, and workspace `21` on the second
|
|
one, both accessible with shortcut `$mod+1` when focused on the right output.
|
|
|
|
The `init` command simply walks through every screen to initialize a prefixed
|
|
workspace. It does it backwards so that you end-up focused on the first screen,
|
|
as usual.
|
|
|
|
|
|
## Exhaustive swaysome commands list
|
|
|
|
* `move [name]`: move the focused container to `[name]` on the same group
|
|
* `move-to-group [id]`: move the focused container to the same relative workspace on the `[id]` workspace group
|
|
* `next-output`: move the focused container to the next output
|
|
* `prev-output`: move the focused container to the previous output
|
|
* `focus [name]`: change focus to `[name]` on the same group
|
|
* `focus-all-outputs [name]`: change all outputs focus to `[name]`
|
|
* `focus-group [id]`: change focus to group `[id]`
|
|
* `next-group`: change focus to the next workspace group
|
|
* `previous-group`: change focus to the previous workspace group
|
|
* `init [name]`: cycle all outputs to create a default workspace with name `[name]`
|
|
* `rearrange-workspaces` Rearrange already opened workspaces to the correct outputs, useful when plugging or unplugging screens
|
|
|
|
## Breaking changes
|
|
|
|
* Starting with 1.1.6, `next_output` and `prev_output` have been changed to `next-output` and `prev-output`.
|